Home › Xerox printers › Xerox Phaser 3052

Xerox Phaser 3052 driver for Mac

Yes, the Xerox Phaser 3052 works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. Install this free, signed, native arm64 driver package and print again. No Rosetta, no Intel-only software from the printer maker, and no need to write or compile a driver yourself.

Install the Xerox Phaser 3052 driver

1. Plug the printer into the Mac with a USB cable and switch it on.
2. Download the installer (.pkg) and open it. Click through, enter your Mac password. It is signed and notarized by Apple, so there are no security warnings.
3. Print something. The installer recognised the printer and set it up as the default.

Still not printing? Restart the Mac once and unplug / re-plug the printer. Then see below.

Wi-Fi, network, or not detected over USB

After installing, open Terminal (⌘+Space, type Terminal), paste this and press Enter:

Copysudo gutenprint-add splix-xerox-phaser-3052

For a network printer, add a name and the printer's address (lpinfo -v lists what macOS can see):

Copysudo gutenprint-add splix-xerox-phaser-3052 MyPrinter socket://192.168.1.50

Or without Terminal: System Settings → Printers & Scanners → Add → Use: Select Software… and pick “Xerox Phaser 3052” ending in “Apple Silicon”.

Why did my Xerox Phaser 3052 stop working?

Xerox's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta until macOS 27, which no longer allows that, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with SpliX 2.0.2, compiled natively for Apple Silicon.

The Xerox Phaser 3052 speaks Samsung's SPL printer language rather than PCL or PostScript, so it uses the bundled native arm64 SpliX driver rather than Gutenprint. Toner save, density and resolution are in the print dialog under Printer Features.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Xerox Phaser 3052 work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 SpliX driver for the Xerox Phaser 3052. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Xerox Phaser 3052 driver?

No. The Xerox Phaser 3052 is already supported by SpliX, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Xerox Phaser 3052 say “The printer software is not compatible with this device”?

Xerox's Mac driver for the Xerox Phaser 3052 is Intel-only and ran through Rosetta, which macOS 27 no longer allows. Install this package, restart the Mac once, then unplug and re-plug the printer.

Similar Xerox models

Xerox DocuPrint N4512PS · Xerox DocuPrint P12 · Xerox DocuPrint P1202 · Xerox DocuPrint P8e · Xerox Phaser 2135 · Xerox Phaser 3020 · Xerox Phaser 3115 · Xerox Phaser 3116 · Xerox Phaser 3117 · Xerox Phaser 3120 · Xerox Phaser 3121 · Xerox Phaser 3122

← Xerox printers