🖨 Mac Printer Drivers

Home › NRG printers › NRG DSm730

NRG DSm730 driver for Mac

Yes, the NRG DSm730 works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. Install this free, signed, native arm64 driver package and print again. No Rosetta, no Intel-only software from the printer maker, and no need to write or compile a driver yourself.

✅ NRG DSm730 is supported. Driver: Gutenprint 5.3.5. Model id: nrg-dsm730

Install the NRG DSm730 driver

  1. Plug the printer into the Mac with a USB cable and switch it on.
  2. Download the installer (.pkg) and open it. Click through, enter your Mac password. It is signed and notarized by Apple, so there are no security warnings.
  3. Print something. The installer recognised the printer and set it up as the default.

Still not printing? Restart the Mac once and unplug / re-plug the printer. Then see below.

Wi-Fi, network, or not detected over USB

After installing, open Terminal (⌘+Space, type Terminal), paste this and press Enter:

sudo gutenprint-add nrg-dsm730

For a network printer, add a name and the printer's address (lpinfo -v lists what macOS can see):

sudo gutenprint-add nrg-dsm730 MyPrinter socket://192.168.1.50

Or without Terminal: System Settings → Printers & Scanners → Add → Use: Select Software… and pick “NRG DSm730” ending in “Apple Silicon”.

Why did my NRG DSm730 stop working?

NRG's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta until macOS 27, which no longer allows that, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the NRG DSm730 work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the NRG DSm730. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own NRG DSm730 driver?

No. The NRG DSm730 is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my NRG DSm730 say “The printer software is not compatible with this device”?

NRG's Mac driver for the NRG DSm730 is Intel-only and ran through Rosetta, which macOS 27 no longer allows. Install this package, restart the Mac once, then unplug and re-plug the printer.

Similar NRG models

NRG DSm635 · NRG DSm645 · NRG DSm651 · NRG DSm660 · NRG DSm675 · NRG DSm725 · NRG DSm735 · NRG DSm745 · NRG MP 1100 · NRG MP 1350 · NRG MP 1600 · NRG MP 161

← NRG printers