🖨 Mac Printer Drivers

Home › Lanier printers › Lanier SG3110DNw

Lanier SG3110DNw driver for Mac

Yes, the Lanier SG3110DNw works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. Install this free, signed, native arm64 driver package and print again. No Rosetta, no Intel-only software from the printer maker, and no need to write or compile a driver yourself.

✅ Lanier SG3110DNw is supported. Driver: Gutenprint 5.3.5. Model id: lanier-sg3110dnw

Install the Lanier SG3110DNw driver

  1. Plug the printer into the Mac with a USB cable and switch it on.
  2. Download the installer (.pkg) and open it. Click through, enter your Mac password. It is signed and notarized by Apple, so there are no security warnings.
  3. Print something. The installer recognised the printer and set it up as the default.

Still not printing? Restart the Mac once and unplug / re-plug the printer. Then see below.

Wi-Fi, network, or not detected over USB

After installing, open Terminal (⌘+Space, type Terminal), paste this and press Enter:

sudo gutenprint-add lanier-sg3110dnw

For a network printer, add a name and the printer's address (lpinfo -v lists what macOS can see):

sudo gutenprint-add lanier-sg3110dnw MyPrinter socket://192.168.1.50

Or without Terminal: System Settings → Printers & Scanners → Add → Use: Select Software… and pick “Lanier SG3110DNw” ending in “Apple Silicon”.

Why did my Lanier SG3110DNw stop working?

Lanier's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta until macOS 27, which no longer allows that, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Lanier SG3110DNw work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the Lanier SG3110DNw. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Lanier SG3110DNw driver?

No. The Lanier SG3110DNw is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Lanier SG3110DNw say “The printer software is not compatible with this device”?

Lanier's Mac driver for the Lanier SG3110DNw is Intel-only and ran through Rosetta, which macOS 27 no longer allows. Install this package, restart the Mac once, then unplug and re-plug the printer.

Similar Lanier models

Lanier Pro C5210S · Lanier Pro C7100 · Lanier Pro C7100S · Lanier Pro C7110 · Lanier Pro C7110S · Lanier SG3110DN · Lanier SG3110SFNw

← Lanier printers