🖨 Mac Printer Drivers

Home › Kyocera printers › Kyocera TASKalfa 400ci

Kyocera TASKalfa 400ci driver for Mac

Yes, the Kyocera TASKalfa 400ci works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. Install this free, signed, native arm64 driver package and print again. No Rosetta, no Intel-only software from the printer maker, and no need to write or compile a driver yourself.

✅ Kyocera TASKalfa 400ci is supported. Driver: Gutenprint 5.3.5. Model id: kyocera-km-taskalfa-400ci

Install the Kyocera TASKalfa 400ci driver

  1. Plug the printer into the Mac with a USB cable and switch it on.
  2. Download the installer (.pkg) and open it. Click through, enter your Mac password. It is signed and notarized by Apple, so there are no security warnings.
  3. Print something. The installer recognised the printer and set it up as the default.

Still not printing? Restart the Mac once and unplug / re-plug the printer. Then see below.

Wi-Fi, network, or not detected over USB

After installing, open Terminal (⌘+Space, type Terminal), paste this and press Enter:

sudo gutenprint-add kyocera-km-taskalfa-400ci

For a network printer, add a name and the printer's address (lpinfo -v lists what macOS can see):

sudo gutenprint-add kyocera-km-taskalfa-400ci MyPrinter socket://192.168.1.50

Or without Terminal: System Settings → Printers & Scanners → Add → Use: Select Software… and pick “Kyocera TASKalfa 400ci” ending in “Apple Silicon”.

Why did my Kyocera TASKalfa 400ci stop working?

Kyocera's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta until macOS 27, which no longer allows that, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Kyocera TASKalfa 400ci work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the Kyocera TASKalfa 400ci. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Kyocera TASKalfa 400ci driver?

No. The Kyocera TASKalfa 400ci is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Kyocera TASKalfa 400ci say “The printer software is not compatible with this device”?

Kyocera's Mac driver for the Kyocera TASKalfa 400ci is Intel-only and ran through Rosetta, which macOS 27 no longer allows. Install this package, restart the Mac once, then unplug and re-plug the printer.

Similar Kyocera models

Kyocera KM-C3232E · Kyocera KM-C4035E · Kyocera KM-C830 · Kyocera KM-C850 · Kyocera TASKalfa 250ci · Kyocera TASKalfa 300ci · Kyocera TASKalfa 500ci

← Kyocera printers