🖨 Mac Printer Drivers

Home › Datamax printers › Datamax-ONeil H4408

Datamax-ONeil H4408 driver for Mac

Yes, the Datamax-ONeil H4408 works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. Install this free, signed, native arm64 driver package and print again. No Rosetta, no Intel-only software from the printer maker, and no need to write or compile a driver yourself.

✅ Datamax-ONeil H4408 is supported. Driver: Gutenprint 5.3.5. Model id: datamax_oneil_H4408

Install the Datamax-ONeil H4408 driver

  1. Plug the printer into the Mac with a USB cable and switch it on.
  2. Download the installer (.pkg) and open it. Click through, enter your Mac password. It is signed and notarized by Apple, so there are no security warnings.
  3. Print something. The installer recognised the printer and set it up as the default.

Still not printing? Restart the Mac once and unplug / re-plug the printer. Then see below.

Wi-Fi, network, or not detected over USB

After installing, open Terminal (⌘+Space, type Terminal), paste this and press Enter:

sudo gutenprint-add datamax_oneil_H4408

For a network printer, add a name and the printer's address (lpinfo -v lists what macOS can see):

sudo gutenprint-add datamax_oneil_H4408 MyPrinter socket://192.168.1.50

Or without Terminal: System Settings → Printers & Scanners → Add → Use: Select Software… and pick “Datamax-ONeil H4408” ending in “Apple Silicon”.

Why did my Datamax-ONeil H4408 stop working?

Datamax's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta until macOS 27, which no longer allows that, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Datamax-ONeil H4408 work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the Datamax-ONeil H4408. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Datamax-ONeil H4408 driver?

No. The Datamax-ONeil H4408 is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Datamax-ONeil H4408 say “The printer software is not compatible with this device”?

Datamax's Mac driver for the Datamax-ONeil H4408 is Intel-only and ran through Rosetta, which macOS 27 no longer allows. Install this package, restart the Mac once, then unplug and re-plug the printer.

Similar Datamax models

Datamax-ONeil E4305L Mark III · Datamax-ONeil E4305P Mark III · Datamax-ONeil H4212 · Datamax-ONeil H4212X · Datamax-ONeil H4310 · Datamax-ONeil H4310X · Datamax-ONeil H4606 · Datamax-ONeil H4606X · Datamax-ONeil H6210 · Datamax-ONeil H6210X · Datamax-ONeil H6212 · Datamax-ONeil H6212X

← Datamax printers